€ 75.000(including VAT)
1953
12.25 m x 4.95 m x 1.45 m
Steel
Detroit Industrial Engine Detroit diesel engine, Diesel 638LH 165 HP 3500rpm 638LH 665 kg
Vinkeveen
tough family boat for long-distance cruising but also an excellent inland cruiser.
Now reduced in price!!!!
Ex commercial vessel, beautifully restored. Super tough and reliable motor yacht. When you're looking for something other than a regular cruiser, you can of course look at an ex commercial vessel. This is a beautiful classic, with the usual line something like this will never be built again. It is indestructible and holds its value.
With this vessel you can simply sail to Rome or to Denmark, and get away with it. The enormously large aft cockpit is of course self-draining but is also a wonderful terrace on the water. Here you can spend a lovely time and enjoy great eating and drinking moments while anchored. The aft cockpit is well equipped with sturdy sea railing so you can also easily board the vessel, giving you an easy entrance into the first saloon. The first saloon or the wheelhouse is fitted all around with large windows, 12 in total.
The exterior of the boat is neatly painted. The gangways are nicely wide and well equipped with safety handrails both along the salon and on the front deck, the trunk deck. On the front deck I also see possibilities to place extra cushions there and to create a good sun deck. This model has a large stainless steel swim ladder on the stern, which extends deep for easy access in and out of the water.
During the photo shoot the boat was in service, but I could immediately see how beautiful the dashboard was, plus how easily you can also reach the underside.
The first salon is immediately very cozy. Everything is mahogany, beautiful ship's floor, nice sleek ceilings, and with a bit of arranging you can still accommodate around eight people here. It's immediately a lovely ship. I always find that very important. You have good and plenty of storage options.
With a beautiful short wide staircase that is very easy to take, you enter the second cabin, and there is the kitchen. With a nice long counter and plenty of daylight, and a couple of large cupboards and drawers. It's very beautiful, such a white counter with electric hob and a stainless steel sink, a large fridge and a hanging cupboard, with the owner's area opposite. Here there's a huge bed, with the toilet opposite, and a spacious shower with shower tray that is really easy to use.
The technology of this ship is the treasure chamber of this boat. Two beautiful engines that have been cared for by the owner like his own children. Everything is beautifully installed. And the entire electrical system has just all been checked. Everything is from Victron and neatly and solidly installed, including all kinds of safety features.
Do take a good look at the photos, there will be more once we let the ship sail, but for the quick decision-maker, call right away with your yacht broker Pieter Pepping from White Whale Yachtbrokers +31(0)653345219 or 0653345219 or Vinkeveen@wwy.nl.
sporty motorboat
PROPULSION SYSTEM
1 6-cylinder in-line 2-stroke diesel engine on the port and starboard side in the engine room
Make
type
engine number
power
year of construction
hour reading
refit
: “GENERAL MOTORS” / “DETROIT DIESEL”
: Port side: 6071A Starboard side:
6072A
: Port side: 6A-26738 Starboard side:
6A-27429
: 147.3 kW at 2,000 rpm adjusted to
121.5 kW
: exact year of construction unknown, however from before 1985; refit 2007
with only a few running hours to date
: n/a
: the main engines were completely overhauled in 2007 at De
Jong Motorenrevisie in Aalsmeer, where the engines
were removed, completely disassembled, inspected
for tolerances and reassembled with, among other things, new
connecting rod bearings and piston rings, and
were then hardly used until the further refit in 2018-2022
nauwelijks in gebruik geweest
Cooling system: intercooling system with
seawater heat exchanger and flat
inlet box with valves and 2 metal
strainer filters
exhaust system: seawater-cooled injected exhaust
with the exhaust ducts through the transom;
exhausts not insulated
fuel system: 2 “Separ” KWA 50 fuel pre-filters/
water separators.
HYDRAULIC
REVERSE-REDUCTION GEAR
CLUTCH GEAR
Make
type
serial
reduction
year of construction
GENERAL MOTORS
: 6703466 (part no.)
: BB side: 6300
SB side: 6288
: 1,06 : 1
: exact year of construction not known but according to
statement as a whole belonging to the above
described main engines; the gearboxes
are at the same time as the main engines
Disassembled
inspected and with new gaskets and
seals reassembled.
Screw shaft pipe Water-lubricated stainless steel BB/SB-side screw shaft with rigid screw shaft coupling flange;
floating bearing instead of rear machine chamber bulkhead throughput
Screw shafts renewed 2018–2022.
4 "Optima" Red Top maintenance-free 50 Ah starter batteries,
1 "Start-Power" maintenance-free 43 Ah generator starter battery,
2 x “Optima” Yellow Top maintenance-free 75 Ah bow thruster batteries
arranged in wooden box in the pre-peak/bow thruster room
The electrical installation was largely newly installed at the 2018-2020 refit.
Nautical
Additional Equipment
1 “Raymarine” Axiom series GPS chartplotter,
1 “Raymarine” autopilot installation with “Raymarine” ACU-400 Actuator Control
Unit
1 "Raymarine" multifunction pointing instrument where heading, speed and
depth indication,
1 "Raymarine" VHF with Distress,
1 "Sailor" RT 144b VHF,
analog lubricating oil pressure, cooling water temperature and fuel and water tank
content meters,
original analogue BB and SB side main motor rev counter with hour meter
2 Electric heavy type wipers,
1 "Vista" pendulum window
Night lighting in the wheelhouse,
1 hand-operated floodlight on the wheelhouse.
Refit In the period 2018-2022, there is a refit at De Wilgenhoek Marina in Vinkeveen
extensive refit to the vessel was carried out, whereby, as already mentioned above,
mostly specified, including the following works
carried out
-vessel completely repainted
-during this the superstructure portholes were removed and reinstalled
-the entire underwater hull treated and various new double plating
installed
-the engine room refitted with electrical, nautical and other
equipment against the front engine room bulkhead
-propeller shaft installations and propellers renewed
-the drinking water system overhauled
-the heating system overhauled
-nautical equipment largely renewed
-interior paneling renewed as described above
-the main engines with reduction gearboxes had already been overhauled in 2007 as
described above and had hardly been in
use until the further refit in 2018-2020.
MAINTENANCE CONDITION The overall maintenance condition of the motor vessel is, referring to the
extensively described refit 2018-2022 above and the propulsion installation refit, excellent.
WHEELHOUSE/SALON Separate dashboard console with contrasting black built-in equipment
top plating and raised section at the front (dashboard console largely
new 2018-2020), large steering wheel, storage compartment and seating plank with support and cushion on
SB front
Salon area with corner sofa with back and seat cushions, storage space in the benches,
table with height-adjustable single table leg (salon area new 2018-2020).
Data according to "U.S. Coast Guard – Boat Record"/Mine Watch Service vessel specification/
expired Measurement Certificate for Inland Vessels/as stated.
Work boat with extensive refit into pleasure craft
Former United States Coast Guard vessel ("Utility Boat").
MAIN DIMENSIONS Length overall
width overall
draft
freeboard
water displacement
max. headroom
speed
: 12.25 m
: 3.45 m
: 1.00 m approx.
: 0.50 m approx. (before refit)
: 21.2 t m³ max. (before refit)
: 3.20 m with mast lowered
: 20 km/h approx.
CABIN Large 2-person bed with 2 drawers and storage underneath,
2 hanging lockers with an open shelf compartment between them, transversely at the rear,
1 separate hanging locker adjoining the galley section at the port front side
containing storage compartments and with open storage space on top
Galley section with a longitudinal worktop unit with a white synthetic worktop
with 1 stainless steel sink with mixer tap,
2 drawers and 3 cupboard spaces in the worktop unit,
1 tapered wall storage shelf above the worktop,
1 built-in “Origo” E300 3-burner electric hob (new 2018–2020),
1 separate coffee machine,
1 “Dometic” MDC-090 90 l electric refrigerator with freezer compartment in housing next to
the 2-person bed.
WET ROOM 1 “Raske & v/d Meyde” RM69 hand pump toilet, both ball valve
shut-off valves new 2018-2020,
shower area separated by a shower curtain with matching
paneling, tub floor and wall shower with mixer taps.
ENGINE ROOM Engine room with crawl height,
partly checker plate floor,
fully insulated with marine insulation,
wooden panel material against the front of the engine room bulkhead for mounting
equipment etc.
VESSEL LAYOUT
INSIDE FROM FRONT TO
STERN
Forepeak/bow thruster space – cabin with 2 port/starboard side portholes,
separate wet room on the starboard side front, galley block on the port side,
large 2-person bed on the starboard side – wheelhouse/lounge with 1 opening window on
port and starboard side front and on starboard side rear, open access on port side to
cabin, 2-part floor hatch on the front of the engine room, corner dinette
on the SB side aft and aluminum door to bridge deck on the BB side aft –
engine room under the wheelhouse/saloon floor and bridge deck – tank room under
the cockpit floor – steering gear room.
INTERIOR PANELING Mahogany veneer paneling with solid molding,
teak veneer floor with ash type inlay strip (new 2018-2020),
white ceiling elements with solid wood connecting molding in wheelhouse/saloon,
corresponding in cabin part,
above the engine room in the wheelhouse double plywood wooden subfloor
SHIP'S PROPELLERS BB-/SB side freely rotating 3-blade propellers, propeller diameter unknown
Propellers renewed 2018-2022
BOW THRUSTER 1 “Vetus” 24 V electric bow thruster with the 2 “Optima” 75 Ah bow thruster
batteries placed in wooden battery box at the location in the forepeak/bow thruster room.
STEERING SYSTEM Hydraulic steering system with “Capitano” model BA200-11TMC single
steering cylinder
“Raymarine” autopilot installation with “Raymarine” 24 V type 2 hydraulic
steering pump; for the autopilot see further under “NAUTICAL EQUIPMENT”
Emergency steering system via vertical hatch on the steering gear room with the
steering rod fitted against the inside of the hatch.
RUDDER SYSTEM BB-/SB side steel free spade rudder.
AUXILIARY SET 1 "Paguro" 9000 generator set, 9 kVA, in sound-dampening enclosure in
engine room with intercooling, plastic exhaust silencer/waterlock and
control panel with overload indication, cooling water temperature,
oil pressure and clock hour meter on dashboard in the wheelhouse
Newly installed with the 2018-2020 refit, hour reading: 1.19 h
Note: The sound-dampening enclosure was not opened for inspection of
the generator set.
SWIMMING LADDER Heavy stainless steel fixed swimming ladder against the stern.
FUEL TANKS 1 port/starboard side steel fuel tank in the tank space under the cockpit floor
Total fuel tank capacity approx. 1,000 liters
WATER TANK 1 Plastic water tank (new 2018-2020) on the centerline of the ship in the tank space,
capacity 175 l Note: all tank capacities as stated.
GREY WATER TANK- -.
INSTALLATION
(HOT) WATER SYSTEM 1 Water pressure set with "Flojet" R4325343 water pressure pump located at the rear of
the engine room, newly installed with the 2018-2020 refit, during which part
of the drinking water piping system was also replaced with plastic pipes and
couplings
1 "Johnson Pump" 220V/1300 W engine cooling water boiler, capacity 30 l,
installed on site, year built 2011.
GAS INSTALLATION -.
HEATING SYSTEM “Eberspächer” D4L diesel-fired hot air heater, 4300 W, well
positioned within easy reach at the front in the engine room
The hot air ducts still need to be installed/
connected throughout the vessel.
BILGE SYSTEM 1 24 V bilge pump in the engine room with automatic float switch (new),
1 24 V bilge pump at the front in the tank hold,
1 24 V bilge pump in the forepeak/bow thruster compartment (new)
Self-draining cockpit with large cockpit drain duct hole through the transom on the port/starboard side.
ANCHOR EQUIPMENT 1 “Vetus” Alex III electric 1,000 W anchor winch, lifting capacity 350 kg
1 Anchor pulled up against the port side foredeck Note: not inspected.
FIRE EXTINGUISHING SYSTEM -.
ELECTRICAL
INSTALLATION
24/230 V, shore power installation, alternator on port and starboard side main engine,
generator set as described above,
1 “Victron” MultiPlus 24V/3,000 VA/70 A battery charger-sine wave inverter
with multi control operating and display panel in the wheelhouse dashboard,
1 “Victron” 7,000 W 230 V isolation transformer,
2 “Victron” battery isolators,
1 “Victron” Orion-Tr 23112-20 DC/DC 240 W converter,
1 “Victron” BlueSolar MPPT 75 115 charge control for 2 solar panels
2 Plastic circuit breaker boxes in the engine room,
1 circuit breaker box in the dashboard console in the pilothouse
All aforementioned equipment neatly installed in the engine room against
a wooden panel against the forward engine room bulkhead
Measurement Certificate for Inland Vessels
Number
measurement mark
navigation area according to Measurement Certificate
date and place of registration
valid until
: 1282
: GN 1282; affixed according to Measurement Certificate
on the starboard side in the rear of the trunk, 3.40 m from
stern plate, 0.85 m from the centreline, 0.72 m above
cockpit floor
: A, B and C
: 30 May 1985 in Rotterdam as
salvage vessel
: 30 May 2000 (expired).
MARK OF
REGISTRATION
5436 B GRON 1985; according to Measurement Certificate fitted on SB-side in the stern
trunk, 3.40 m from transom plate, 0.85 m from centerline, 0.78 m above cockpit floor
Cadastral object deregistered dated 11 May 1998 in cadastral registration
(registration deregistered).
LAST
DRY DOCKING
During the 2018-2022 refit.
BUILDING MATERIAL AND
CONSTRUCTION METHOD
Steel (galvanized according to “U.S. Coast Guard – Boat Record”) welded
single-chine frame hull with V-shaped bow, hard bilge stern and
transom stern,
hull with transverse and longitudinal stiffeners,
aluminum superstructure consisting of high wheelhouse/saloon section and low
cabin superstructure in front of it,
“Vetus” wheelhouse windows in aluminum profile.
NUMBER AND LOCATION OF
STEEL BULKHEADS
1 Forepeak bulkhead,
1 forward engine room bulkhead,
1 aft engine room bulkhead.
VESSEL LAYOUT
OUTSIDE FROM FORWARD
STERN
Foredeck bulwark, 1 head bollard and 1 s.s. port/starboard side bollard, hawse holes at the
side bollards, anchor winch and flush deck hatch on forepeak/bow thruster room –
cabin superstructure with side decks alongside, no side railing, port/starboard side
handrailing on cabin superstructure, 1 cabin superstructure synthetic-aluminum profile
escape/ventilation hatch – wheelhouse superstructure with same continuous handrailing
alongside, 2 large aluminum roof hatches and foldable aluminum navigation light
mast on top – bridge deck (trunk) with side decks alongside, heavy
tube railing and wide staircase with same continuous railing to cockpit – cockpit with
heavy double towing bollard behind bridge deck, aluminum chequer plate cockpit floor
with recessed forward-hinging large hatch on aft ship fuel
hold, recessed port/starboard side manhole cover type above the port/starboard side
gas oil tank, low cockpit tube railing, closed aft ship bulwark and vertical hatch
below this on steering gear room under the aft deck – open aft deck with
s.s. port/starboard side bollard and heavy s.s. swimming ladder.
Disclaimer:
Although the utmost care has been given to the correctness, completeness and topicality of our information, no rights can be derived from it.